Refrigerated Cabinets Care Instructions                             

Installation           

Cabinets are designed specific to a purpose so it is important to clarify what product will be stored in the refrigerator: e'g Medical, food,florist or other. The cabinet has a thermostat so that it is easy to check temperatures.It is important that only our Qualified technical personnel undertake adjustments to these temperature controls as they will be aware of the Manufacturers Guidelines or perimeters.

After the Cabinet is delivered and put into position it is checked to make sure it is level to ensure that there is correct drainage of the evaporator. Positioning of the Unit is also importanat as when placed in humid areas and fitted with Glass display fronts, there is a possibility for condensation to appear on the outside- Our  technicans can help to prevent this problem. Each Unit is run with a  'Self conatined Condenser ' and commissioning of the Unit is carried out by our experienced Service Technicians.

Use and maitenance of your Refrigerated Cabinet.

Endevour to limit the time the Cabinet door is left open. Do not prop doors open at any time.-Keep door seals clean and free from food debris.Use a fine soft brush to clean along the door seal grooves and a soft cloth soaked in warm soapy water to prevent grime and mould build up on the flat surfaces. Always wipe dry with a fresh clean cloth.Lazco will measure and instal new door seals for your existing cabinets.Lazco can replace damaged or broken doors.Contact us for a measure and quote.

 It is a good practice to wipe the inside of the unit with a soft cloth or paper towel soaked in warm soapy water and a few drops of lemon essence.This will keep the Unit clean and fresh.Wipe the surfaces dry with a clean cloth or paper towel. Check Door Handles and latches are secure, clean and in good working order.All hardware can be ordered here.

Hot food products should be allowed to cool before placing them in to the refrigerator.Food should be covered at all times and stainless steel containers should be used in the blown air well for more efficient cold transfer. Do not over load the cabinet as this will not allow good  air circulation anound the product in the cabinet which in turn will interfere with the temperature.Keep raw and pre-cooked products in different areas of your cabinet.We recommend Raw product being kept at a lower level.

Shelves

Shelving spacing  is fully adjustable and the shelvesare fixed by clips.Wipe shelves clean with a soft cloth soaked in warm soapy water and wipe dry. Rotate and check stock daily so product does not exceed its use by date.Check shelving clips are in tact, complete and secure.If New clips are required they can be ordered here.Shelving is constructed of different mediums.Lazco stocks a range of shelving and can re-coat old or existing plastic shelves. Check all shelving is clean and free of damage or rough edges. Contact us if you require any new shelving or changes to your existing shelves.

The base of the Cabinet should be wiped regularly and kept clear of debris or food particles as a build up of these can lead to a blockage of the drains.Drains should be flushed through on a regular basis with clean warm water and the evaporator pans emptied.

Sheduled Service Maitenance

We recommend regular maitenance to your refrigeration Equipment to prevent Emergency Call-outs and avoidable stock lost and interruption to business.These visits can be planned on a Monthly, Quarterly, bi-annually or annual plan depending on the amount of Refrigeration and the degree of daily usage.Experienced technicians will check each Cabinet and all maitenance records are kept as reference. 

MAITENANCE PROCEDURES

Temperature Checks	Temperatures checks carried out and recorded on work sheets
Control Settings	Control settings are checked and all operations are tested and recorded.
Component Settings	All controls, components and settings are noted on individual maintenance sheets.
Visual Inspection	Visual inspection of cabinet, hardware, Doors, Hinges, Handles,shelves,Clips/Evaporator Trays /Tungdish/Drains - Checked and condition noted.
Condenser	Condenser is cleaned and all components are checked and tested-
Evaporator	Evaporator is cleaned and components checked and tested
Repairs Found	Any urgent repairs or parts that are found to need urgent replacement will be priced and our clients  notified prior to installation. Quotation of works provided.
Recommended Works Needed	Once the service report is completed Any recommended work will be quoted and a proposal provided .Recommended works are carried out only when the signed confirmation is sent through to the office.